Welcome to ZK Electronic

16 years of industry experience

Good material qualty, high efficiency, fast delivery

搜索

NEWS

NEWS

>
>
>
SMT Panasonic machine care and maintenance

SMT Panasonic machine care and maintenance

  • Categories:Industry News
  • Author:Becky Su
  • Origin:
  • Time of issue:2022-11-30 11:31
  • Views:

(Summary description)SMT Panasonic machine care and maintenance Any one SMT equipment, its technical innovation condition will gradually deteriorate with the increase in the use of years, the various parts of the machine will inevitably produce different degrees of wear and loosen. SMT machine internal lubricant replacement is not complete, the gas circuit contains moisture oil, etc., the environment is not properly controlled caused by dust and other problems, will cause the machine internal generate a lot of dust and scale, gas circuit, solenoid valve, vacuum generation device, etc. The accumulation of a large amount of oil and water, circuitry, boards and cards too much dust, which is not timely targeted protection maintenance, will affect the normal work of the machine, may also cause excessive wear and tear of certain parts, and even lead to serious accidents. Therefore, must be based on scientific maintenance methods and technical specifications, regular maintenance of SMT machines and equipment, so that all parts of the machine always work well, to achieve full life use. But many people know that the big maintenance is a very luxurious set, but how many people know what projects are really included, the following. (1) the SMT machine and circuit board surface dust and dirt for cleaning and dismantling, so as not to cause poor heat dissipation inside the machine due to dust and dirt, resulting in overheating and burnout of electrical parts.  (2) the SMT machine internal gas circuit, solenoid valve, vacuum generation device, cylinder, etc. for disassembly and cleaning; the oil and dirt in the gas circuit if not cleaned in a timely manner, will block the gas circuit, resulting in poor gas circuit, thus causing high throwing material; in serious cases, the oil stains accumulated in the gas circuit will corrode the internal seals and components of the solenoid valve, vacuum generation device, cylinder, etc., thus causing damage to the components and seriously affect the normal use of the machine. (3) for SMT machine moving parts, cleaning, and lubrication. Machine operation for a long time, due to improper environmental control, there will be a lot of dust stuck in the active part (for example: the screw, guide, slider, drive belt, motor coupling, etc.). If you can not get timely and professional maintenance and cleaning of the moving part of the machine, the machine for a long time in the overload state operation, will inevitably affect the service life of the machine. (4) SMT machine has passed the warranty period, a long time of operation, SMT machine can not be all professional overhaul, SMT machine some parts have hidden problems (such as: wear and tear of the machine wiring, wear and tear of the cable frame, motor, screw fixing screws loose, etc., some mechanical parts of the action is not good, parameters set wrong, etc.), hidden problems can not be solved in time, is bound to the normal production of the machine in the future Therefore, the machine must be a major maintenance, timely inspection and detection of hidden problems within the machine and solve them, thereby reducing the frequency of SMT machine failure and improving production efficiency. (5) machine after a long time running, SMT machine related parts have wear, deformation, aging, each ministry machine parts between the abrasion appeared tiny deviation and so on phenomenon, machine * original parameters already can't adapt to machine status quo, SMT machine placement accuracy has been affected, so, must be regularly to machine for correction, make machine in * high precision state production, improve the quality of products. (6) to SMT machine to carry on the big maintenance, can effectively reduce the throw material rate, reduces the alarm frequency, improves the machine production efficiency, enhances the production quality. With the above information, it will know the details of the maintenance of the placement machine, in order to machine equipment can be more stable, more efficient operation, thus bringing higher economic benefits, so we recommend that customers in due course, should be professional maintenance and maintenance of the machine!

SMT Panasonic machine care and maintenance

(Summary description)SMT Panasonic machine care and maintenance
Any one SMT equipment, its technical innovation condition will gradually deteriorate with the increase in the use of years, the various parts of the machine will inevitably produce different degrees of wear and loosen. SMT machine internal lubricant replacement is not complete, the gas circuit contains moisture oil, etc., the environment is not properly controlled caused by dust and other problems, will cause the machine internal generate a lot of dust and scale, gas circuit, solenoid valve, vacuum generation device, etc. The accumulation of a large amount of oil and water, circuitry, boards and cards too much dust, which is not timely targeted protection maintenance, will affect the normal work of the machine, may also cause excessive wear and tear of certain parts, and even lead to serious accidents. Therefore, must be based on scientific maintenance methods and technical specifications, regular maintenance of SMT machines and equipment, so that all parts of the machine always work well, to achieve full life use.

But many people know that the big maintenance is a very luxurious set, but how many people know what projects are really included, the following.

(1) the SMT machine and circuit board surface dust and dirt for cleaning and dismantling, so as not to cause poor heat dissipation inside the machine due to dust and dirt, resulting in overheating and burnout of electrical parts.

 (2) the SMT machine internal gas circuit, solenoid valve, vacuum generation device, cylinder, etc. for disassembly and cleaning; the oil and dirt in the gas circuit if not cleaned in a timely manner, will block the gas circuit, resulting in poor gas circuit, thus causing high throwing material; in serious cases, the oil stains accumulated in the gas circuit will corrode the internal seals and components of the solenoid valve, vacuum generation device, cylinder, etc., thus causing damage to the components and seriously affect the normal use of the machine.

(3) for SMT machine moving parts, cleaning, and lubrication. Machine operation for a long time, due to improper environmental control, there will be a lot of dust stuck in the active part (for example: the screw, guide, slider, drive belt, motor coupling, etc.). If you can not get timely and professional maintenance and cleaning of the moving part of the machine, the machine for a long time in the overload state operation, will inevitably affect the service life of the machine.

(4) SMT machine has passed the warranty period, a long time of operation, SMT machine can not be all professional overhaul, SMT machine some parts have hidden problems (such as: wear and tear of the machine wiring, wear and tear of the cable frame, motor, screw fixing screws loose, etc., some mechanical parts of the action is not good, parameters set wrong, etc.), hidden problems can not be solved in time, is bound to the normal production of the machine in the future Therefore, the machine must be a major maintenance, timely inspection and detection of hidden problems within the machine and solve them, thereby reducing the frequency of SMT machine failure and improving production efficiency.

(5) machine after a long time running, SMT machine related parts have wear, deformation, aging, each ministry machine parts between the abrasion appeared tiny deviation and so on phenomenon, machine * original parameters already can't adapt to machine status quo, SMT machine placement accuracy has been affected, so, must be regularly to machine for correction, make machine in * high precision state production, improve the quality of products.

(6) to SMT machine to carry on the big maintenance, can effectively reduce the throw material rate, reduces the alarm frequency, improves the machine production efficiency, enhances the production quality.

With the above information, it will know the details of the maintenance of the placement machine, in order to machine equipment can be more stable, more efficient operation, thus bringing higher economic benefits, so we recommend that customers in due course, should be professional maintenance and maintenance of the machine!

  • Categories:Industry News
  • Author:Becky Su
  • Origin:
  • Time of issue:2022-11-30 11:31
  • Views:
Information

SMT Panasonic machine care and maintenance

 

Any one SMT equipment, its technical innovation condition will gradually deteriorate with the increase in the use of years, the various parts of the machine will inevitably produce different degrees of wear and loosen. SMT machine internal lubricant replacement is not complete, the gas circuit contains moisture oil, etc., the environment is not properly controlled caused by dust and other problems, will cause the machine internal generate a lot of dust and scale, gas circuit, solenoid valve, vacuum generation device, etc. The accumulation of a large amount of oil and water, circuitry, boards and cards too much dust, which is not timely targeted protection maintenance, will affect the normal work of the machine, may also cause excessive wear and tear of certain parts, and even lead to serious accidents. Therefore, must be based on scientific maintenance methods and technical specifications, regular maintenance of SMT machines and equipment, so that all parts of the machine always work well, to achieve full life use.

But many people know that the big maintenance is a very luxurious set, but how many people know what projects are really included, the following.

(1) the SMT machine and circuit board surface dust and dirt for cleaning and dismantling, so as not to cause poor heat dissipation inside the machine due to dust and dirt, resulting in overheating and burnout of electrical parts.

 (2) the SMT machine internal gas circuit, solenoid valve, vacuum generation device, cylinder, etc. for disassembly and cleaning; the oil and dirt in the gas circuit if not cleaned in a timely manner, will block the gas circuit, resulting in poor gas circuit, thus causing high throwing material; in serious cases, the oil stains accumulated in the gas circuit will corrode the internal seals and components of the solenoid valve, vacuum generation device, cylinder, etc., thus causing damage to the components and seriously affect the normal use of the machine.

(3) for SMT machine moving parts, cleaning, and lubrication. Machine operation for a long time, due to improper environmental control, there will be a lot of dust stuck in the active part (for example: the screw, guide, slider, drive belt, motor coupling, etc.). If you can not get timely and professional maintenance and cleaning of the moving part of the machine, the machine for a long time in the overload state operation, will inevitably affect the service life of the machine.

(4) SMT machine has passed the warranty period, a long time of operation, SMT machine can not be all professional overhaul, SMT machine some parts have hidden problems (such as: wear and tear of the machine wiring, wear and tear of the cable frame, motor, screw fixing screws loose, etc., some mechanical parts of the action is not good, parameters set wrong, etc.), hidden problems can not be solved in time, is bound to the normal production of the machine in the future Therefore, the machine must be a major maintenance, timely inspection and detection of hidden problems within the machine and solve them, thereby reducing the frequency of SMT machine failure and improving production efficiency.

(5) machine after a long time running, SMT machine related parts have wear, deformation, aging, each ministry machine parts between the abrasion appeared tiny deviation and so on phenomenon, machine * original parameters already can't adapt to machine status quo, SMT machine placement accuracy has been affected, so, must be regularly to machine for correction, make machine in * high precision state production, improve the quality of products.

(6) to SMT machine to carry on the big maintenance, can effectively reduce the throw material rate, reduces the alarm frequency, improves the machine production efficiency, enhances the production quality.

With the above information, it will know the details of the maintenance of the placement machine, in order to machine equipment can be more stable, more efficient operation, thus bringing higher economic benefits, so we recommend that customers in due course, should be professional maintenance and maintenance of the machine!

Keyword:

Related News

CONTACT US

Hotline:(0086)755-27801389
Mobile: (0086)15323874439
Sale No.1: becky@hysmt.cn
Sale No.2: fhysmt@hysmt.cn
Sale No.3: zksale@hysmt.cn
Sale No.4: sale@hysmt.cn
Sale No.5: elsey@hysmt.cn

GIVE ME A MESSAGE

Copyright: ZK Electronic Technology Co., Ltd    粤ICP备11054297号    Powered by www.300.cn