Welcome to ZK Electronic

16 years of industry experience

Good material qualty, high efficiency, fast delivery

搜索

NEWS

NEWS

>
>
>
Electrical structure of Panasonic plug-in machines

Electrical structure of Panasonic plug-in machines

  • Categories:Industry News
  • Author:Becky Su
  • Origin:
  • Time of issue:2022-12-12 11:33
  • Views:

(Summary description)Electrical structure of Panasonic plug-in machines I. Voltage power supply. 1. The input voltage of the power bank is 110V, protected by 30A fuse. 2. the output voltage of the generator is +5V -5V -9V +12V +24V +15V -15V. 100V. 3. +5V /20A is the role of each induction lamp -5V/2A +12V IC8080. 4. 4. -9V role is to power the female slot card. 5. 5. The role of +12V IC8080. 6. 6. the role of +24V is the clutch brake, electromagnetic counting, 062 inductor. opc13 interface, 12PIN interface, opc5 interface, with 3A fuse protection. 7. ±15V is for driver. Motor operation amplifier with 3A fuse protection. 8. 100V acts as solenoid valve, relay. II.I/O BOX    I/O BOX is mainly for the signals of various inputs and outputs on the machine. It is connected to the machine through each interface card. 1. I/O1 role of the main operation panel signal lights. (14), (13) signals. 2. 2. I/O2 acts as a memory signal. 3. 3. I/O3 acts as the main operator panel on/off key, (35) (36) signal. 4. 4. I/O4 acts as encoder 00, 01, 02, 03, signal. 5. I/O5 acts as track, insertion, detection, (16) signals, e.g. 163 164 165 V CUTTER, (04) (05) (06). 7. 7. I/O7 acts as insertion action (12 ) 9. I/O9 acting cylinder, track (12 ) 10. I/O10 action cylinder (HEAD ANVIL ROTATION) FEED (11 ) 13 I/O13 role standby 14. I/O attention to I/O (1-7) card components are basically the same (wiring is not the same) after replacing the wiring can be interchangeable. (I/O8-13) can also be. III. Computer box Computer box thing the core part of the machine. Responsible for processing a variety of data in the I/O BOX connection. The role of PLCI is to control each action (FEED CUTTEV). 2. 2. the role of IFR signal conversion and control action. 3. 3. OBC stores the program. 4. 4. NC XYZ controls XYZ movement. 5. 5. MONIZI controls the program rotation. 6. 6. SIOP controls the main and sub operation panel movements. 7. 7. Notes: IFR T0 FEED T1 (070) 0 T2 V CUTTER T3 Semi-automatic pickup action of the secondary control panel, (073) T4 exchange.

Electrical structure of Panasonic plug-in machines

(Summary description)Electrical structure of Panasonic plug-in machines

I. Voltage power supply.

1. The input voltage of the power bank is 110V, protected by 30A fuse.

2. the output voltage of the generator is +5V -5V -9V +12V +24V +15V -15V. 100V.

3. +5V /20A is the role of each induction lamp -5V/2A +12V IC8080. 4.

4. -9V role is to power the female slot card. 5.

5. The role of +12V IC8080. 6.

6. the role of +24V is the clutch brake, electromagnetic counting, 062 inductor. opc13 interface, 12PIN interface, opc5 interface, with 3A fuse protection.

7. ±15V is for driver. Motor operation amplifier with 3A fuse protection.

8. 100V acts as solenoid valve, relay.

II.I/O BOX

   I/O BOX is mainly for the signals of various inputs and outputs on the machine. It is connected to the machine through each interface card.

1. I/O1 role of the main operation panel signal lights. (14), (13) signals. 2.

2. I/O2 acts as a memory signal. 3.

3. I/O3 acts as the main operator panel on/off key, (35) (36) signal. 4.

4. I/O4 acts as encoder 00, 01, 02, 03, signal. 5.

I/O5 acts as track, insertion, detection, (16) signals, e.g. 163 164 165 V CUTTER, (04) (05) (06). 7.

7. I/O7 acts as insertion action (12 )

9. I/O9 acting cylinder, track (12 )

10. I/O10 action cylinder (HEAD ANVIL ROTATION) FEED (11 )

13 I/O13 role standby

14. I/O attention to I/O (1-7) card components are basically the same (wiring is not the same) after replacing the wiring can be interchangeable. (I/O8-13) can also be.

III. Computer box

Computer box thing the core part of the machine. Responsible for processing a variety of data in the I/O BOX connection.

The role of PLCI is to control each action (FEED CUTTEV). 2.

2. the role of IFR signal conversion and control action. 3.

3. OBC stores the program. 4.

4. NC XYZ controls XYZ movement. 5.

5. MONIZI controls the program rotation. 6.

6. SIOP controls the main and sub operation panel movements. 7.

7. Notes: IFR T0 FEED T1 (070) 0 T2 V CUTTER T3 Semi-automatic pickup action of the secondary control panel, (073) T4 exchange.

  • Categories:Industry News
  • Author:Becky Su
  • Origin:
  • Time of issue:2022-12-12 11:33
  • Views:
Information

Electrical structure of Panasonic plug-in machines

I. Voltage power supply.

1. The input voltage of the power bank is 110V, protected by 30A fuse.

2. the output voltage of the generator is +5V -5V -9V +12V +24V +15V -15V. 100V.

3. +5V /20A is the role of each induction lamp -5V/2A +12V IC8080. 4.

4. -9V role is to power the female slot card. 5.

5. The role of +12V IC8080. 6.

6. the role of +24V is the clutch brake, electromagnetic counting, 062 inductor. opc13 interface, 12PIN interface, opc5 interface, with 3A fuse protection.

7. ±15V is for driver. Motor operation amplifier with 3A fuse protection.

8. 100V acts as solenoid valve, relay.

II.I/O BOX

   I/O BOX is mainly for the signals of various inputs and outputs on the machine. It is connected to the machine through each interface card.

1. I/O1 role of the main operation panel signal lights. (14), (13) signals. 2.

2. I/O2 acts as a memory signal. 3.

3. I/O3 acts as the main operator panel on/off key, (35) (36) signal. 4.

4. I/O4 acts as encoder 00, 01, 02, 03, signal. 5.

I/O5 acts as track, insertion, detection, (16) signals, e.g. 163 164 165 V CUTTER, (04) (05) (06). 7.

7. I/O7 acts as insertion action (12 )

9. I/O9 acting cylinder, track (12 )

10. I/O10 action cylinder (HEAD ANVIL ROTATION) FEED (11 )

13 I/O13 role standby

14. I/O attention to I/O (1-7) card components are basically the same (wiring is not the same) after replacing the wiring can be interchangeable. (I/O8-13) can also be.

III. Computer box

Computer box thing the core part of the machine. Responsible for processing a variety of data in the I/O BOX connection.

The role of PLCI is to control each action (FEED CUTTEV). 2.

2. the role of IFR signal conversion and control action. 3.

3. OBC stores the program. 4.

4. NC XYZ controls XYZ movement. 5.

5. MONIZI controls the program rotation. 6.

6. SIOP controls the main and sub operation panel movements. 7.

7. Notes: IFR T0 FEED T1 (070) 0 T2 V CUTTER T3 Semi-automatic pickup action of the secondary control panel, (073) T4 exchange.

Keyword:

Related News

CONTACT US

Hotline:(0086)755-27801389
Mobile: (0086)15323874439
Sale No.1: becky@hysmt.cn
Sale No.2: fhysmt@hysmt.cn
Sale No.3: zksale@hysmt.cn
Sale No.4: sale@hysmt.cn
Sale No.5: elsey@hysmt.cn

GIVE ME A MESSAGE

Copyright: ZK Electronic Technology Co., Ltd    粤ICP备11054297号    Powered by www.300.cn