Welcome to ZK Electronic

16 years of industry experience

Good material qualty, high efficiency, fast delivery

搜索

PRODUCTS

PRODUCTS

>
>
>
>
>
SN74LVC1G66DBVR SWITCH ANALOGICO 01 CIRCUITO SPST-NO 10 OHM TEXAS INSTRUMENTS package SOT-23-5
搜索
SN74LVC1G66DBVR SWITCH ANALOGICO 01 CIRCUITO SPST-NO 10 OHM TEXAS INSTRUMENTS package SOT-23-5 (2)
SN74LVC1G66DBVR SWITCH ANALOGICO 01 CIRCUITO SPST-NO 10 OHM TEXAS INSTRUMENTS package SOT-23-5 (2)
Key Words:
SN74LVC1G66DBVR
SWITCH
SWITCH ANALOGICO
SN74LVC1G66DBVR SWITCH ANALOGICO 01 CIRCUITO SPST-NO 10 OHM TEXAS INSTRUMENTS package SOT-23-5
Commodity Number:SN74LVC1G66DBVR
SN74LVC1G66DBVR SWITCH ANALOGICO 01 CIRCUITO SPST-NO 10 OHM TEXAS INSTRUMENTS package SOT-23-5    Product Details Category: switches PN: SN74LVC1G66DBVR Brand: / Description: SN74LVC1G66DBVR SWITCH ANALOGICO 01 CIRCUITO SPST-NO 10 OHM TEXAS INSTRUMENTS package SOT-23-5 Package: SOT-23-5   Applications 1、It is used to isolate the power supply and disconnect the high-voltage maintenance equipment from the energized equipment so that there is a clearly visible disconnection point between them. 2、The disconnecting switch cooperates with the circuit breaker to carry out reversing operation according to the need of system operation mode, in order to change the system operation wiring mode. 3、It is used to connect or disconnect small current circuits. The disconnecting switch can carry out the following operations: pulling and closing the bypass current of the closed circuit switch; pulling and closing the grounding wire of the neutral point of the transformer, but when the neutral point is connected with an arc-absorbing coil, it can be operated only when there is no fault in the system; pulling and closing the voltage transformer and the arrester; pulling and closing the capacitance currents of the busbar and the equipment directly connected to the busbar; pulling and closing the unloaded lines with capacitance currents of no more than 5 amps; triple disconnecting switches. can pull and close loads with voltages of 10 kV or less and currents of 15 A or less, and so on. When operating the disconnecting switch, it should be noted that when the line is energized, the disconnecting switch on the bus side should be closed first, then the disconnecting switch on the line side should be closed, and then the circuit breaker should be closed. When the line is de-energized, the circuit breaker should be disconnected first, and then the disconnecting switch should be pulled. The high voltage disconnecting switch should not be pulled or closed with load.   QC Process ZK Electronic is an SMD Connectors distributor. We have supported global customers' business with our high-quality products and service. To match customers' requirements, our QC Team will conduct a complete inspection of all the products before shipping out.    The procedures of Connectors inspection includes:   ▪ Lable Verification to check if the part is original and consistent with  the order ▪ Appearance Inspection to make sure the package is correct and there is no damage to the surface ▪ Package Inspection  ▪ Third-party test conduction via our in-house, certified test labs for quality guarantee ▪ Picture archive for the shipping package Each step of the inspection is very rigorous and aims to ensure that all products are delivered with the expected standard of excellence and quality.   Package     Please contact us!  Original brand new in stock, bulk price is more favorable! Due to in the finishing stage, all the products could not be uploaded one by one, if you have other models, pls send them to us, we'll send a quotation as soon as possible!     Remark:   1. About the price: Because the price of electronic components fluctuates greatly, please refer to the quotation of the day, please understand!   2. About products: Due to the variety of electronic components, you can choose suitable and cost-effective products according to the needs of the project, because we are long-term cooperation!   3. Payment method: support T/T, Paypal, Western Union.   4.Delivery time: 3~5 days by DHL,FedEX,UPS,TNT...and so on.
Category:
Switch
Pageviews:
201
Product Description

SN74LVC1G66DBVR SWITCH ANALOGICO 01 CIRCUITO SPST-NO 10 OHM TEXAS INSTRUMENTS package SOT-23-5 

 

Product Details

Category: switches

PN: SN74LVC1G66DBVR

Brand: /

Description: SN74LVC1G66DBVR SWITCH ANALOGICO 01 CIRCUITO SPST-NO 10 OHM TEXAS INSTRUMENTS package SOT-23-5

Package: SOT-23-5

 

Applications

1、It is used to isolate the power supply and disconnect the high-voltage maintenance equipment from the energized equipment so that there is a clearly visible disconnection point between them.
2、The disconnecting switch cooperates with the circuit breaker to carry out reversing operation according to the need of system operation mode, in order to change the system operation wiring mode.
3、It is used to connect or disconnect small current circuits. The disconnecting switch can carry out the following operations: pulling and closing the bypass current of the closed circuit switch; pulling and closing the grounding wire of the neutral point of the transformer, but when the neutral point is connected with an arc-absorbing coil, it can be operated only when there is no fault in the system; pulling and closing the voltage transformer and the arrester; pulling and closing the capacitance currents of the busbar and the equipment directly connected to the busbar; pulling and closing the unloaded lines with capacitance currents of no more than 5 amps; triple disconnecting switches. can pull and close loads with voltages of 10 kV or less and currents of 15 A or less, and so on.
When operating the disconnecting switch, it should be noted that when the line is energized, the disconnecting switch on the bus side should be closed first, then the disconnecting switch on the line side should be closed, and then the circuit breaker should be closed. When the line is de-energized, the circuit breaker should be disconnected first, and then the disconnecting switch should be pulled. The high voltage disconnecting switch should not be pulled or closed with load.

 

QC Process

ZK Electronic is an SMD Connectors distributor. We have supported global customers' business with our high-quality products and service. To match customers' requirements, our QC Team will conduct a complete inspection of all the products before shipping out. 

 

The procedures of Connectors inspection includes:

 

Lable Verification to check if the part is original and consistent with  the order
▪ Appearance Inspection to make sure the package is correct and there is no damage to the surface
▪ Package Inspection 
▪ Third-party test conduction via our in-house, certified test labs for quality guarantee
▪ Picture archive for the shipping package

Each step of the inspection is very rigorous and aims to ensure that all products are delivered with the expected standard of excellence and quality.

 

Package

 

 

Please contact us!  Original brand new in stock, bulk price is more favorable! Due to in the finishing stage, all the products could not be uploaded one by one, if you have other models, pls send them to us, we'll send a quotation as soon as possible!

 

 

Remark:

 

1. About the price: Because the price of electronic components fluctuates greatly, please refer to the quotation of the day, please understand!

 

2. About products: Due to the variety of electronic components, you can choose suitable and cost-effective products according to the needs of the project, because we are long-term cooperation!

 

3. Payment method: support T/T, Paypal, Western Union.

 

4.Delivery time: 3~5 days by DHL,FedEX,UPS,TNT...and so on.

未找到相应参数组,请于后台属性模板中添加

Related Products

becky@hysmt.cn
(0086)755-27801389
skype:beckysmt

CONTACT US

Hotline:(0086)755-27801389
Mobile: (0086)15323874439
Sale No.1: becky@hysmt.cn
Sale No.2: fhysmt@hysmt.cn
Sale No.3: zksale@hysmt.cn
Sale No.4: sale@hysmt.cn
Sale No.5: elsey@hysmt.cn

GIVE ME A MESSAGE

Copyright: ZK Electronic Technology Co., Ltd    粤ICP备11054297号    Powered by www.300.cn

Product information

Product serial number
Thumbnail
Name of product
Retail price
Expected unit price
*Order quantity
Operation
Product serial number: SN74LVC1G66DBVR
$formItem.imageUrl
SN74LVC1G66DBVR SWITCH ANALOGICO 01 CIRCUITO SPST-NO 10 OHM TEXAS INSTRUMENTS package SOT-23-5
Retail price: 0.0 USD USD
* Expected unit price
*Order quantity
-+
Remove

Contact information

Basic information
Method of contact and profession
Company information
Verification Code

Add product X

Product categories:
All products
Selected 0 Each