PRODUCTS
180° DPDT PRESSURE SWITCH WITH LOCK 6PIN PITCH 2,54MM Pushbutton Switch 8.5x8.5x17.7MM Self-Locking 6pin
Product Details
Category: switches
PN: Pushbutton Switch 8.5x8.5x17.7MM
Brand: /
Description: Pushbutton Switch 8.5x8.5x17.7MM Self-Locking 6pin
Package: switch
Applications
1、It is used to isolate the power supply and disconnect the high-voltage maintenance equipment from the energized equipment so that there is a clearly visible disconnection point between them.
2、The disconnecting switch cooperates with the circuit breaker to carry out reversing operation according to the need of system operation mode, in order to change the system operation wiring mode.
3、It is used to connect or disconnect small current circuits. The disconnecting switch can carry out the following operations: pulling and closing the bypass current of the closed circuit switch; pulling and closing the grounding wire of the neutral point of the transformer, but when the neutral point is connected with an arc-absorbing coil, it can be operated only when there is no fault in the system; pulling and closing the voltage transformer and the arrester; pulling and closing the capacitance currents of the busbar and the equipment directly connected to the busbar; pulling and closing the unloaded lines with capacitance currents of no more than 5 amps; triple disconnecting switches. can pull and close loads with voltages of 10 kV or less and currents of 15 A or less, and so on.
When operating the disconnecting switch, it should be noted that when the line is energized, the disconnecting switch on the bus side should be closed first, then the disconnecting switch on the line side should be closed, and then the circuit breaker should be closed. When the line is de-energized, the circuit breaker should be disconnected first, and then the disconnecting switch should be pulled. The high voltage disconnecting switch should not be pulled or closed with load.
QC Process
ZK Electronic is an SMD Connectors distributor. We have supported global customers' business with our high-quality products and service. To match customers' requirements, our QC Team will conduct a complete inspection of all the products before shipping out.
The procedures of Connectors inspection includes:
▪ Lable Verification to check if the part is original and consistent with the order
▪ Appearance Inspection to make sure the package is correct and there is no damage to the surface
▪ Package Inspection
▪ Third-party test conduction via our in-house, certified test labs for quality guarantee
▪ Picture archive for the shipping package
Each step of the inspection is very rigorous and aims to ensure that all products are delivered with the expected standard of excellence and quality.
Package
Please contact us! Original brand new in stock, bulk price is more favorable! Due to in the finishing stage, all the products could not be uploaded one by one, if you have other models, pls send them to us, we'll send a quotation as soon as possible!
Remark:
1. About the price: Because the price of electronic components fluctuates greatly, please refer to the quotation of the day, please understand!
2. About products: Due to the variety of electronic components, you can choose suitable and cost-effective products according to the needs of the project, because we are long-term cooperation!
3. Payment method: support T/T, Paypal, Western Union.
4.Delivery time: 3~5 days by DHL,FedEX,UPS,TNT...and so on.
Related Products