Sony Mounter Standards Main performance 1, the type of components can be mounted, specifications, placement direction, substrate size, placement range in line with the specification indicators; 2, patch speed: 1608 sheet components to test the CPH placement rate is not less than 60% of the nominal IPC9850 speed, or SPC speed is not greater than 2 times the nominal speed; 3, fly piece rate is not greater than 3 ‰. Operating system 1, a variety of indicators, buttons, operating handle appearance complete, operation, display normal; 2, the computer system works normally; 3, input and output systems work normally.

Sony Mounter Standards

Main performance
1, the type of components can be mounted, specifications, placement direction, substrate size, placement range in line with the specification indicators;
2, patch speed: 1608 sheet components to test the CPH placement rate is not less than 60% of the nominal IPC9850 speed, or SPC speed is not greater than 2 times the nominal speed;
3, fly piece rate is not greater than 3 ‰.

Operating system
1, a variety of indicators, buttons, operating handle appearance complete, operation, display normal;
2, the computer system works normally;
3, input and output systems work normally.

Mechanical parts
1, the transmission belt, chain, connecting pin complete, no aging damage;
2, the transmission guide, screw running smoothly and coordinated, no abnormal noise, no oil leakage.

Control section
1, drive cylinders, solenoid valves, piping, connectors, no foreign body blockage, no loose air leakage. Drive cylinder and solenoid valve work normally, no noise;
2, compressed air drying filter device is complete and intact;
3, the patch head vacuum is not less than 500mmHg.

Mounting accuracy
That is, the maximum offset between the centre of the component and the centre line of the corresponding pad, not more than 1/3 of the width of the component welding foot (visual inspection); or the incidence of abnormal offset is not greater than 3‰.
Instruments, meters intact appearance, accurate instructions, readings eye-catching, in the qualified period of use;
Regular maintenance of equipment inside and outside, keep clean, no oil, no corrosion, around the attached with parts such as orderly arrangement, equipment lubrication is good.