Welcome to ZK Electronic
PRODUCTS
PRODUCTS
搜索
Key Words:
CM602 Feeder Calibration JIG
CM402 CM602 Feeder Calibration JIG
Commodity Number:CM602 Feeder Calibration JIG
CM402 CM602 Feeder Calibration JIG
Category:
Feeder calibration jigs
Pageviews:
0
Product Description
CM402 CM602 Feeder Calibration JIG
Name: CM402 CM602 SMT Feeder Calibration JIG
It is essential for this equipment that enhanced productivity , installation and quality improvement
As the high efficiency vision camera is asked in order to investigate precisely and repair the error of device position which results from the modification and wear of tape feeder in the SMD device.
The Feeder, which supplies resources in the SMT production line, should be under clear condition continuously because it has relatively close correlation with the quality of a current line, production efficiency and loss
Convenience in use---------
1.The acquisition for the rectangular coordinate of X-Y direction.
2.Check for the existence, transformation, user in the feeder
3.The installation is to equip it with actual device and consolidation in feeder base
4.Lens` safe arrival part, CCD Camera, the precise micro controller of X, Y, Z axis
5.The simple calibration for removing or taking feeder easily
6.It is correction as measurement with CCD Camera.
7.The use pressure is able to control in the regulator and air cylinder.
8.Verification and correction available worker`s convenience and well carriage by the work desk.
Specification:
Overall size 500 x 350 x 550 mm, L x W x H
Type Electric
Monitor 12" LED display, with cross mark
Camera CCD , 50 times magnification
Object Feeder KME CM402 / CM602
Previous:
Sanyo feeder calibration jig
Related Products